MAXLEVE-AUTOPART MA15268401X Fuel Injectors 2.3L 3.5L 4PCS

( Brand: Maxleve-autopart ), ( Manufacturer Part Number: MA15268401X ), ( Manufacturer Warranty: 1 Year ), ( Interhange Part Number: 613460919579, 06164p5m000 ), ( Oe/oem Part Number: 06164p2j000 ), ( Product Type: Fuel Injector ), ( Fitment Type: Direct Replacement ), ( Bundle Listing: No ), ( Placement On Vehicle: Front ), ( Orifice Type: 1 Hole ), ( Injector Design: Metal Composite Plastic ), ( Connector Color: Black ), ( Package: 4pcs ), ( Fuel Type: Gasoline ), ( Universal Fitment: Yes ), ( Connector Type: Male )

Review MAXLEVE AUTOPART Honda 2.3l 2002 Acura 3.5l 4pcs Fuel Injectors fits ACCORD RL 1996–1999

Maxleve-Autopart MA15268401X Fuel Injectors - Compatible with Honda Accord (2.3L, 1998-2002) and Acura RL (3.5L, 1996-1999)

Experience enhanced engine performance and fuel efficiency with the Maxleve-Autopart MA15268401X Fuel Injectors, expertly engineered for both Honda Accord 2.3L models (1998-2002) and Acura RL 3.5L vehicles (1996-1999).

These high-quality, OEM-style fuel injectors are designed to deliver precise fuel atomization and optimal air/fuel mixture for superior engine operation. Each injector features a corrosion-resistant construction, ensuring longevity and reliability even under extreme conditions.

The Maxleve-Autopart MA15268401X Fuel Injectors come as a set of four, ensuring a seamless replacement process for your vehicle. Each injector is meticulously calibrated to meet the performance specifications of your Honda Accord or Acura RL, guaranteeing a perfect fit and hassle-free installation.

By upgrading your vehicle's fuel injectors with the Maxleve-Autopart MA15268401X, you can expect improved throttle response, increased horsepower, and reduced emissions. These injectors are an excellent choice for vehicle owners seeking to enhance their driving experience while maintaining the highest standards of quality and reliability.

Invest in the Maxleve-Autopart MA15268401X Fuel Injectors today, and experience the difference in power, efficiency, and performance for your Honda Accord or Acura RL.

Product: Maxleve-Autopart MA15268401X Fuel Injectors (compatible with Honda Accord 2.3L 1998-2002, Acura RL 3.5L 1996-1999)

1. Compatibility: The fuel injectors are designed to fit Honda Accord and Acura RL models within the specified years, ensuring a seamless installation process.

2. Quality: Maxleve is a well-known brand in the automotive market, suggesting that these fuel injectors may offer reliable performance.

3. Cost-effective: Compared to OEM (Original Equipment Manufacturer) parts, these aftermarket fuel injectors are often more affordable, making them an attractive option for budget-conscious consumers.

4. Availability: Aftermarket parts are generally easier to find and quicker to ship than OEM parts, which can save time when making repairs or upgrades.

1. Durability concerns: Aftermarket parts may not be as durable as OEM parts, potentially leading to more frequent replacements.

2. Quality inconsistency: While Maxleve is a reputable brand, there can still be variations in quality among individual products.

3. Warranty: Aftermarket parts often come with shorter or no warranties compared to OEM parts.

4. Potential compatibility issues: Although listed as compatible, there may be instances where the fuel injectors do not fit perfectly or work as expected. This could potentially require additional modifications or parts.

The Maxleve-Autopart MA15268401X fuel injectors can be a cost-effective solution for replacing faulty injectors in Honda Accord and Acura RL models. However, it's essential to recognize that aftermarket parts may not offer the same level of durability and warranty as OEM parts. If reliability and longevity are top priorities, it may be more prudent to invest in OEM parts, even if they are more expensive. Ultimately, the decision comes down to personal needs, budget, and the level of risk one is willing to accept.

For budget-conscious consumers looking to save money on fuel injector replacements, the Maxleve-Autopart MA15268401X fuel injectors can be a suitable choice. Just ensure that you are aware of any potential compatibility and durability issues, and consider the warranty coverage provided by the seller. If durability and warranty are critical factors, it may be more beneficial to invest in OEM parts.

Details:

Its not easy to diagnose a fuel injector as the symptoms it causes can be similar bad spark plug or ignition coil, meaning, one of cylinders is firing. Use caution: Fuel injection systems are under high-pressure and gas spraying out of the injector seal is highly combustible. Allow the car to run until it stalls. 3.Hard To Speed Up.

Allow the injectors to soak for several hours thoroughly clean them of carbon deposits. The main function of the fuel rail consists in optimal distribution gasoline, methane, etc. To injectors high or low pressure supply systems endothermic engines. Shut the car off immediately if a leak is present. Dirty fuel injectors will affect the flow rate of fuel, which can result in poor idling, stalling, hard starting or sputtering, reduces your cars ability to effectively accelerate.

First, disconnect the main fuel line at end of rail. If the fuel injectors are leaking externally you should not drive your vehicle. A: Make sure the engine is cold enough to touch. Once it is loose, lift the rail up and remove each of injectors.

This step relieves the fuel pressure in rail and can safely be removed. Inspect the old fuel injector making sure sealing O rings are accounted for.Match new to unit, some replacements can look a little different which is normal. Disconnect the battery. While some gas tank additive injector cleaners may help reduce the build up in injectors, only real way to clean them and restore peak performance is remove use proper chemicals equipment.

Common Fuel Injection Problems. Remove the upper and lower O-ring seals on injectors. Raise the hood of car an inspect fuel injector rail while is running at idle. Boxes, APO/FPO or Military Mail Box.

How to Stop a Fuel Injector Leak. After soaking, rinse the injectors with clean water and immediately blow them dry compressed air. The metal rod over the fuel injectors is rail. Most fuel rails are just pressed onto the injector tops, once you've removed hold down screws or bolts it should pull away, with a little oomph.

Standard O-rings will quickly deteriorate and fail. A strong odor of gasoline is a good indicator that there fuel leak. B: Remove plastic engine covers using appropriate socket. Using a small standard screwdriver or pick remove the retainer clip from fuel injector and work rail.

Clogged Fuel Injectors. It should take more than 2 hours or so if you are mechanically inclined. Externally leaking injectors pose a fire risk and need to be completely replaced. Use clean engine oil to lube the O ring seals preventing seal damage during reassembly.

Install new O-rings. How to replace flue injectors in your car. Newly Listed. The fuel rail is the long, round metal bar that runs along top of injectors and held onto manifold with a few bolts.

6.Lightning Alarm. Lightly coat the injectors with petroleum jelly and insert them into fuel rail. With everything disconnected from the rail, pull it away fuel injectors. Look carefully, however, at the top and bottom of fuel rail.

The fuel rail is held in place by screws or bolts, depending on your cars setup. 2.Noise At Idle. Make sure the O-rings are designed for use with gasoline and fit vehicle being serviced. It is not necessary to keep them in order.

Set covers aside. Depending on the model, some engines will need fuel line disconnected from rail in order to move. If it is related to a clogged fuel injector likely due old being ran through the engine, resulting in residue getting stuck inside or its filter basket. Place the injectors in a carburetor soaking basket and drop bucket of cleaner.

Warning: lease confirm compatibility again. 5.Engine shake. 1.Fuel Consumption Increased. Push the new injector into fuel rail and reinsert trainer clip tighten down.

Use the socket and ratchet to remove bolts brackets holding fuel rail in place. What is a fuel rail. Depending on your type quality of gas and oil filter change frequency it will last from 50,000 miles to about 100,000. Remove these screws or bolts.

Remove any associated fuel lines or hold-down clamps that will prevent the rail from being lifted up to unseat injectors engine. After the job is complete start engine while using a flashlight to check for leaks ensure was done correctly. If your wiring travels over the top of rail, see next step to disconnect first. They are held in place by snug-fitting O-rings and easily pulled out.

Leaking Fuel Injectors. Disconnect the injector wiring harness and remove fuel rail bolts that hold in place.

specifications carfuelinjector:

• for models: Rl, Accord
• for makes: Honda, Acura
• for years: 1996-1999
• brand: Maxleve-autopart
• mpn: Ma15268401x
• manufacturer warranty: 1 Year
• interhange part number: 613460919579, 06164p5m000
• oe/oem part number: 06164p2j000
• product type: Fuel Injector
• fitment type: Direct Replacement
• bundle listing: No
• placement on vehicle: Front
• orifice type: 1 Hole
• injector design: Metal Composite Plastic
• connector color: Black
• package: 4pcs
• fuel type: Gasoline
• universal fitment: Yes
• connector type: Male

shipping carfuelinjector:

• cost: $0.00
• class: Standard
• transit: 3-9 Days
• type: Fixed
• service: Standard

general carfuelinjector:

• condition: New
• Air Fuel Delivery > Fuel Injection Parts > Fuel Injectors

payments carfuelinjector:

• credit card: Visa
• wallet: Google-pay
• other

returns carfuelinjector:

• paid by: Seller
• time: 30 Days
• policy: Returns Accepted

offer carfuelinjector:

• sold: 0
• best offers: True
• options: Ship-to-home
• started: June 30, 2025
• availability: In Stock
• quantity: 5

seller carfuelinjector:

• city: Ontario, California
• # reviews: 307
• rating: 99.3%

Maxleve-autopart MA15268401X Is Similar To:

• Maxleve-autopart Ma15128401x Fuel Injectors For 2012 2011 2010 2009 2008 Land Rover Lr2 3.2l Lr001982 (41% similar) Don't pull it just yet; start the engine and disconnect fuse. So, make sure you know what you re getting into before get to work. Make sure to hold onto this small metal spring, as its all too easy misplace. Skipping this step could result in a messy and dangerous project, so refer to your vehicles ...(January 2nd, 2025)
• Maxleve-autopart Ma10532601x Fuel Injectors For Volkswagen Eos 2.0l 2009-2016 Gti 2008-2014 (42.1% similar) Black or grey smoke. The check engine light is on. Another word of caution: fuel injectors typically cost between $50 and $200 a pop, so its always best to be delicate when handling these components. This presents a raft of safety issues, so unless you re fairly confident in your local ambulance ...(January 6th, 2025)
• Maxleve-autopart Ma15295101x Fuel Injector For Ford F-750 F-650 Chevrolet Kodiak Gmc Topkick 2009-2004 7.2l (37% similar) You might smell a strong fuel odour in and around your car if there is leak or the injectors are releasing too much. Read more about it here. Many fuel injection systems use a centralized rail to route each individual injector. Increased fuel consumption. It is a replacement part, not original part...(January 14th, 2025)
• Maxleve-autopart Ma15265301x For 2006 2005 2004 Mazda Rx-8 1.3l 4pcs Fuel Injectors (64.2% similar) Raise the hood of car an inspect fuel injector rail while is running at idle. Install new o-rings. With everything disconnected from the rail, pull it away fuel injectors. Shut the car off immediately if a leak is present. A strong odor of gasoline is a good indicator that there fuel leak. ...(January 22nd, 2025)
• Maxleve-autopart Ma15266701u Fuel Injectors For 2017 2016 Nissan Rogue 2015 Altima 2.5l (42.9% similar) Don't pull it just yet; start the engine and disconnect fuse. Often caused by dirty or clogged fuel injectors. Increased fuel consumption. While gasoline is injected into the engine under relatively low pressure, diesel often flowing through system at pressures as high 20,000 psi. Rough idling ...(February 1st, 2025)
• Maxleve-autopart B843880eu01 Fuel Injectors For Jaguar Xk 5.0l 2010-2015 Xfr-s 2013-2015 (37.5% similar) You can diagnose many different car problems by the colour of exhaust gases. Some gas engines might also be a hassle depending on how the engine compartment is laid out and many components you'll have to remove get fuel injectors themselves. The first step in replacing a fuel injector is to relieve ...(February 1st, 2025)
• Maxleve-autopart B15004801eu Fuel Injectors For 2018 2017 2016 2015 2014 2013 2012-2007 Toyota Yaris 1.5l (35.4% similar) With the tops of fuel injectors exposed, its now time to remove wiring harness connected each injector. The vehicle might shake and stall when idling if it is not getting enough fuel in the combustion chambers. Another word of caution: fuel injectors typically cost between $50 and $200 a pop, so its...(February 12th, 2025)
• Maxleve-autopart Ma15404201x For Honda Civic 2013-2015 Accord 2008-12 Cr-v 2010-2011 2.4l 4pcs Fuel Injectors (65.7% similar) Some vehicles will have an individual fuel line feeding into each injector, which you can remove one by. Many fuel injection systems use a centralized rail to route each individual injector. Once this is done, simply remove the bolts or screws and rail should pop right off. You might smell a strong ...(February 12th, 2025)
• Maxleve-autopart B15073901eu Fuel Injectors For 2011-2007 Acura Cxs 2005-2006 Rsx 2011-2006 Honda Civic 2.0l (34.9% similar) Rough idling stalling. The engine misfires. Read more about it here. Now you re ready to get pulling. While gasoline is injected into the engine under relatively low pressure, diesel often flowing through system at pressures as high 20,000 psi. Simply lubricate the seals on new injector, replace it ...(March 3rd, 2025)
• Maxleve-autopart B15072601eu Fuel Injectors For 2017-2011 Ford Mustang 3.7l 2017 2016 2015 F-150 3.5l (38% similar) Simply lubricate the seals on new injector, replace it in same hole you took out of, and reconnect wiring harness. Black smoke is an indication that the air-fuel mixture too rich. Read more about it here. Once you start up the vehicle, fuel system should depressurize itself. You might smell a strong...(March 3rd, 2025)
• Maxleve-autopart B15071401eu Fuel Injectors For Jeep Cherokee 1999-2001 Tj 1999-2004 L6 4.0l Gas (38% similar) These harnesses are usually held on by little more than a single spring, which you can pry out with Flathead screwdriver or similar implement. The vehicle might shake and stall when idling if it is not getting enough fuel in the combustion chambers. Some gas engines might also be a hassle depending ...(March 3rd, 2025)