VIPIH M586-A110 Fuel Injector Yager Gp 39300-LEA6-800 39300-LEB2-800

( Brand: Vipih ), ( Manufacturer Part Number: M586-A110 ), ( Part Type: Fuel Injector ), ( Manufacturer Warranty: 6 Month )

Review VIPIH Fuel Injector Kymco Yager Gp Jr 100 fits 200 125

The **VIPiH M586-A110 39300-LEA6-800** and **39300-LEB2-800** fuel injectors are precision-engineered components designed specifically for high-performance modifications and reliable operation in the **Kymco Yager 200 GP 125** scooter, catering to both stock and upgraded fuel systems. These injectors are part of VIPiH s advanced line of **high-flow, direct-port fuel injectors**, optimized to deliver consistent, atomized fuel delivery for improved throttle response, smoother power delivery, and enhanced overall engine efficiency. Built with **high-quality stainless steel bodies** and **durable O-rings**, these injectors are engineered to withstand the demands of aggressive riding styles, high RPM applications, and extended use without compromising on performance or longevity.

The **M586-A110** and **39300-LEA6-800** variants are designed to replace the stock injectors in the Yager 200 s fuel system, offering a **higher flow rate** to support increased air intake from aftermarket air filters, exhaust systems, or engine modifications. The **800 series** designation indicates these injectors are calibrated for **800 cc/min flow rates**, making them ideal for applications where stock injectors may struggle to keep up with demand, such as when paired with a **performance ECU tune** or a **turbocharged or supercharged setup** (if applicable). Their **precise internal needle and seat design** ensures minimal fuel waste and optimal spray pattern, reducing the risk of fouling or carbon buildup while maintaining clean combustion.

For the **Kymco Yager 200 GP 125**, these injectors are particularly valuable for riders seeking **better low-end torque, quicker acceleration, and a more refined power curve**, especially when combined with a **high-performance fuel pump** or **upgraded fuel rail**. The **39300-LEB2-800** variant may offer slight variations in internal components or calibration, allowing for fine-tuning based on specific engine modifications or regional fuel standards. Both injectors are **compatible with standard OEM fuel lines and connectors**, ensuring a straightforward installation process without the need for additional adapters or modifications to the scooter s fuel system.

Beyond performance, VIPiH s injectors are built with **reliability in mind**, featuring **corrosion-resistant coatings** and **tight tolerances** to prevent leaks or clogging over time. They are designed to work seamlessly with **modern ECU systems**, including aftermarket units that require precise fuel metering for optimal tuning. Whether you're preparing the Yager 200 for **track days, daily commuting with extra power, or simply upgrading to a more responsive ride**, these injectors provide the **consistency and efficiency** needed to maximize engine performance while maintaining fuel economy and drivability.

For best results, pairing these injectors with a **high-quality fuel filter**, **performance-grade fuel**, and a **properly calibrated ECU map** will ensure they operate at peak efficiency. VIPiH s M586-A110 and 39300-LEA6/LEB2-800 injectors are not just replacements they are **performance-enhancing components** that elevate the Yager 200 s already capable engine to new levels of responsiveness and reliability.

### **Pros and Cons of buying a VIPH M586-A110 (39300-LEA6-800 / 39300-LEB2-800) Fuel Injector for a Kymco Yager 200 GP (125cc)**

1. **OEM Compatibility** The part number (39300-LEA6-800 / 39300-LEB2-800) is an original or highly compatible aftermarket alternative, meaning it should fit and function as intended for the Kymco Yager 200 GP (125cc) without major modifications.

2. **Improved Fuel Efficiency & Performance** A properly functioning injector ensures better fuel atomization, leading to smoother acceleration, better throttle response, and potentially improved fuel economy compared to a clogged or failing original injector.

3. **Prevents Engine Damage** A failing injector can cause fuel starvation, leading to misfires, rough idling, or even engine damage. Replacing it with a known-good unit helps maintain engine health.

4. **Cost-Effective Alternative to OEM** While not always cheaper than a brand-new OEM injector, aftermarket options like VIPH are often more affordable than purchasing directly from Kymco or a dealer, especially if the original is no longer available.

5. **Durability & Reliability** VIPH is a reputable brand in the aftermarket parts industry, known for producing durable injectors that meet or exceed OEM standards. Many users report long-term reliability with these units.

6. **Easier Availability** Unlike original Kymco injectors, which may be discontinued or hard to find, aftermarket options like this one are widely stocked by online retailers, making replacement quicker and more convenient.

7. **Potential for Better Flow Rates** Some aftermarket injectors are designed with optimized flow characteristics, which can enhance engine performance, especially if the original injector was degraded over time.

---

1. **Potential Quality Variations** While VIPH is a trusted brand, there is always a risk of receiving a counterfeit or subpar unit, especially if purchased from unverified sellers. Always buy from reputable dealers to avoid this.

2. **Installation Complexity** Fuel injectors require careful handling, proper sealing, and correct wiring. If not installed correctly, issues like fuel leaks, electrical problems, or improper fuel delivery can occur. DIYers without mechanical experience may need professional help.

3. **Compatibility Concerns** While the part numbers suggest compatibility, slight variations in engine tuning or fuel system setup (e.g., ECU calibration) could affect performance. Some riders report minor adjustments are needed post-installation.

4. **Cost of Additional Components** Replacing an injector may require new fuel lines, O-rings, or even a new fuel pump if the system was compromised by the old injector s failure. These extras add to the overall cost.

5. **Warranty Limitations** Aftermarket parts often come with shorter or more limited warranties compared to OEM components. If the injector fails prematurely, repairs or replacements may not be fully covered.

6. **Potential for Overkill** If the original injector was only slightly degraded, a full replacement might be unnecessary. In some cases, cleaning the existing injector (if possible) could be a cheaper alternative.

7. **ECU or Tuning Adjustments May Be Needed** Some modern bikes with electronic fuel injection (EFI) require ECU recalibration or tuning after injector replacement to optimize performance. This may not be straightforward for all riders.

---

The **VIPH M586-A110 (39300-LEA6-800 / 39300-LEB2-800) fuel injector** is a solid aftermarket choice for the **Kymco Yager 200 GP (125cc)**, offering OEM-level compatibility, improved performance, and long-term reliability. It is particularly beneficial if the original injector is failing, causing poor engine performance, or if you re looking for a cost-effective upgrade.

However, the decision should consider factors like installation difficulty, potential need for additional components, and whether the original injector could be salvaged. If you re comfortable with basic mechanical work and source the part from a trusted seller, this injector is a **recommended upgrade**. For those unsure about installation, consulting a motorcycle mechanic is advisable to ensure proper fitment and tuning.

- Your Kymco Yager s original injector is confirmed faulty or degraded.

- You want a reliable, OEM-compatible aftermarket alternative.

- You re prepared to handle installation (or have a mechanic assist).

- You prioritize performance, fuel efficiency, and long-term engine health.

- The original injector is only mildly worn and could be cleaned or repaired.

- You re unsure about the installation process and lack mechanical experience.

- You cannot verify the authenticity of the part from the seller.

- Your budget allows for a professional installation and potential tuning adjustments.

For most riders experiencing injector-related issues, this part is a **worthwhile investment** that enhances the bike s reliability and performance. Always pair the purchase with high-quality fuel lines, O-rings, and proper maintenance to maximize longevity.

Details:

We respond within 48h with solution. Item shows signs of use/wear. Important Notes. VIPIH is presently capable of supplying all demands for motor parts from the petrol pump to rectifier in a wide range.

Free return shipping if our mistake. Compare OEM# on your original part. 39300-LEA6-800 39300-LEB2-800 Fuel Injector For KYMCO YAGER 200 GP 125 JR 100. VIPIH fulfills all needs of its clients completely and on a timely basis with the know-how it has built up since was established comprehension knowledge sectors standards.

Items On Sale: 10%off. Match mounting hole patterns in photos. Return doesn't match the original product condition missing/damaged. If You're Unhappy.

Warranty Coverage. Photos/video of the issue. Required: Proof of purchase clear defect photos/video. Verify electrical connector types if applicable.

90-365 Day Coverage varies by product - see listing details. Critical checks before purchase. Claim Process.

specifications carfuelinjector:

• for models: 200, 125
• for makes: Kymco
• brand: Vipih
• mpn: M586-a110
• part type: Fuel Injector
• manufacturer warranty: 6 Month

shipping carfuelinjector:

• class: Standard
• service: Standard
• cost: $0.00
• transit: 4-9 Days
• type: Fixed

offer carfuelinjector:

• best offers: True
• availability: In Stock
• sold: 0
• started: March 25, 2026
• options: Ship-to-home
• quantity: 5

returns carfuelinjector:

• paid by: Seller
• time: 60 Days
• policy: Returns Accepted

payments carfuelinjector:

• other
• wallet: Paypal
• credit card: Diners-club

seller carfuelinjector:

• city: Chino, California
• # reviews: 482
• rating: 98.9%

general carfuelinjector:

• condition: New
• Air Fuel Delivery > Fuel Injection Parts > Fuel Injectors

Vipih M586-A110 Is Similar To:

• Vipih C199-c051 Fuel Injector O-ring Kit Fit Chevrolet Silverado 1500 2019-2019 Camaro (43.6% similar) Physical damage drops/accidents. Warranty no-questions-asked warranty. Application specific design to ensure a perfect FIT3. 90-365 day coverage varies by product - see listing details. Our advantage. Clear photos/video of the issue. Installation errors YouTube tutorial links provided. Meets or ...(September 2nd, 2025)
• Vipih M586-a120 49056-0038 Fuel Injector For Kawasaki Mule Pro Fx Fxr Fxt Kaf820 Eps (57.6% similar) Critical checks before purchase. Photos/video of the issue. 5.AFTERMARKET parts, for modify use. Item shows signs of use/wear. 90-365 day coverage varies by product - see listing details. Return doesn't match the original product condition missing/damaged. Compare oem# on your original part. ...(March 1st, 2026)
• Vipih M586-a083 Fuel Injector 27609-01b For 4.3 Harley 2001-2016 Twin Cam Us (52.1% similar) Claim process. Return doesn't match the original product condition missing/damaged. Vipih is presently capable of supplying all demands for motor parts from the petrol pump to rectifier in a wide range. 90-365 day coverage varies by product - see listing details. Free return shipping if our mistake...(May 1st, 2026)