MAXLEVE-AUTOPART E15265601X Fuel Injectors 2.5L V50

( Brand: Maxleve-autopart ), ( Manufacturer Part Number: E15265601X ), ( Manufacturer Warranty: 1 Year ), ( Item Weight: 1 Lb ), ( Oe/oem Part Number: 30757534, 307575340 ), ( Product Type: Fuel Injector ), ( Fitment Type: Direct Replacement ), ( Bundle Listing: No ), ( Placement On Vehicle: Front ), ( Number Of Hole: 4 Hole ), ( Injector Design: Metal Composite Plastic ), ( Connector Color: As Shown In The Picture ), ( Package: 5pcs ), ( O-rings Included: Yes, Preinstalled ), ( Fuel Delivery Type: Fog-type Spray ), ( Oe Spec Or Performance/custom: Oe Spec ), ( Fuel Type: Gasoline ), ( Performance Part: Yes ), ( Connector Type: Male )

Review MAXLEVE AUTOPART Volvo 2.5l 2013 V50 Fuel Injectors fits C30 S40 2005–2011

Maxleve-Autopart Fuel Injectors for Volvo C30 (2.5L), V50, S40 (2013-2008, 2011-2005)

The Maxleve-Autopart E15265601X Fuel Injectors are a precise and efficient solution for your Volvo C30 (2.5L), V50, and S40 vehicles from model years 2013 to 2008 (C30), 2011 to 2005 (V50 and S40). These high-quality fuel injectors are designed to deliver optimal performance and fuel efficiency, enhancing the overall driving experience of your valued Volvo.

Crafted with precision engineering, these fuel injectors are an exact OEM fit, ensuring a seamless installation process without any modifications required. They are engineered to perfectly match the fuel and air requirements of your Volvo, ensuring a smooth and powerful engine performance.

The Maxleve-Autopart E15265601X Fuel Injectors are constructed from premium materials, guaranteeing durability and reliability under various driving conditions. Each injector is rigorously tested to ensure consistent fuel delivery, reducing emissions and improving fuel economy.

By choosing the Maxleve-Autopart E15265601X Fuel Injectors, you are not only investing in a high-performing component but also extending the lifespan of your Volvo engine. These injectors are a cost-effective solution for maintaining the performance and longevity of your Volvo, making them an ideal choice for Volvo enthusiasts and everyday drivers alike.

Upgrade your Volvo C30, V50, or S40 today with the Maxleve-Autopart E15265601X Fuel Injectors. Experience the difference of precise fuel delivery, improved engine performance, and enhanced fuel efficiency. Drive with confidence knowing that you have chosen a reliable and high-quality product that meets the exacting standards of your Volvo vehicle.

Product: Maxleve-Autopart E15265601X Fuel Injectors for Volvo C30 2.5L (2013-2008), V50, S40 (2011-2005)

1. Cost-effective: This product is often priced lower than the original manufacturer's parts, offering a more budget-friendly option for Volvo owners.

2. OEM Compatibility: The Maxleve-Autopart injectors are designed to fit and function identically to the original equipment, ensuring a seamless replacement.

3. Quality Warranty: This product comes with a warranty, providing peace of mind for consumers in case of any defects or malfunctions.

1. Potential Quality Concerns: Since these are aftermarket parts, there may be some variation in quality between different batches or from other manufacturers.

2. Lack of Brand Reputation: Compared to original equipment manufacturers, aftermarket brands like Maxleve may not have as well-established a reputation for reliability and customer service.

3. Potential Installation Challenges: Depending on the user's mechanical skills and familiarity with the Volvo's fuel injector system, installation might require professional assistance or additional research.

Purchasing the Maxleve-Autopart E15265601X Fuel Injectors can be a great choice for budget-conscious Volvo owners who prioritize OEM compatibility and a warranty. However, it's essential to consider the potential quality concerns and installation challenges when making your decision. For those seeking a more established brand or more peace of mind, original equipment manufacturer (OEM) parts may be a better choice. Ultimately, it's essential to weigh the pros and cons based on your specific needs and budget.

If you're comfortable with potential quality variations and installation challenges, the Maxleve-Autopart E15265601X Fuel Injectors can be a cost-effective solution for replacing faulty injectors in your Volvo C30, V50, or S40. If you prefer a more established brand or require professional installation, consider OEM parts or consulting a trusted mechanic.

Details:

It is not necessary to keep them in order. Shut the car off immediately if a leak is present. Push the new injector into fuel rail and reinsert trainer clip tighten down. Disconnect the battery.

Dirty fuel injectors will affect the flow rate of fuel, which can result in poor idling, stalling, hard starting or sputtering, reduces your cars ability to effectively accelerate. It should take more than 2 hours or so if you are mechanically inclined. 1.Fuel Consumption Increased. Use the socket and ratchet to remove bolts brackets holding fuel rail in place.

Remove these screws or bolts. Inspect the old fuel injector making sure sealing O rings are accounted for.Match new to unit, some replacements can look a little different which is normal. Depending on your type quality of gas and oil filter change frequency it will last from 50,000 miles to about 100,000. If your wiring travels over the top of rail, see next step to disconnect first.

How to replace flue injectors in your car. How to Stop a Fuel Injector Leak. First, disconnect the main fuel line at end of rail. Make sure the O-rings are designed for use with gasoline and fit vehicle being serviced.

Leaking Fuel Injectors. Newly Listed. Lightly coat the injectors with petroleum jelly and insert them into fuel rail. Depending on the model, some engines will need fuel line disconnected from rail in order to move.

Common Fuel Injection Problems. 8pcs Fuel injectors as pictures show. Clogged Fuel Injectors. Disconnect the injector wiring harness and remove fuel rail bolts that hold in place.

Install new O-rings. Use caution: Fuel injection systems are under high-pressure and gas spraying out of the injector seal is highly combustible. 3.Hard To Speed Up. If it is related to a clogged fuel injector likely due old being ran through the engine, resulting in residue getting stuck inside or its filter basket.

Place the injectors in a carburetor soaking basket and drop bucket of cleaner. Using a small standard screwdriver or pick remove the retainer clip from fuel injector and work rail. After soaking, rinse the injectors with clean water and immediately blow them dry compressed air. Most fuel rails are just pressed onto the injector tops, once you've removed hold down screws or bolts it should pull away, with a little oomph.

B: Remove plastic engine covers using appropriate socket. Its not easy to diagnose a fuel injector as the symptoms it causes can be similar bad spark plug or ignition coil, meaning, one of cylinders is firing. 6.Lightning Alarm. Standard O-rings will quickly deteriorate and fail.

Set covers aside. Look carefully, however, at the top and bottom of fuel rail. What is a fuel rail. After the job is complete start engine while using a flashlight to check for leaks ensure was done correctly.

Remove any associated fuel lines or hold-down clamps that will prevent the rail from being lifted up to unseat injectors engine. Include in the package. Allow the injectors to soak for several hours thoroughly clean them of carbon deposits. If the fuel injectors are leaking externally you should not drive your vehicle.

2.Noise At Idle. The metal rod over the fuel injectors is rail. The fuel rail is held in place by screws or bolts, depending on your cars setup. Boxes, APO/FPO or Military Mail Box.

Use clean engine oil to lube the O ring seals preventing seal damage during reassembly. A strong odor of gasoline is a good indicator that there fuel leak. They are held in place by snug-fitting O-rings and easily pulled out. The fuel rail is the long, round metal bar that runs along top of injectors and held onto manifold with a few bolts.

Once it is loose, lift the rail up and remove each of injectors. 5pcs Fuel injectors as pictures show. The main function of the fuel rail consists in optimal distribution gasoline, methane, etc. To injectors high or low pressure supply systems endothermic engines. 5.Engine shake.

Raise the hood of car an inspect fuel injector rail while is running at idle. Externally leaking injectors pose a fire risk and need to be completely replaced. With everything disconnected from the rail, pull it away fuel injectors. While some gas tank additive injector cleaners may help reduce the build up in injectors, only real way to clean them and restore peak performance is remove use proper chemicals equipment.

Allow the car to run until it stalls. Maxleve-autopart. Remove the upper and lower O-ring seals on injectors. This step relieves the fuel pressure in rail and can safely be removed.

A: Make sure the engine is cold enough to touch.

part #: e15265601x price

• $56.49

specifications carfuelinjector:

• for models: C30, S40
• for makes: Volvo
• for years: 2005-2011
• brand: Maxleve-autopart
• mpn: E15265601x
• manufacturer warranty: 1 Year
• item weight: 1 Lb
• oe/oem part number: 30757534, 307575340
• product type: Fuel Injector
• fitment type: Direct Replacement
• bundle listing: No
• placement on vehicle: Front
• number of hole: 4 Hole
• injector design: Metal Composite Plastic
• connector color: As Shown In The Picture
• package: 5pcs
• o-rings included: Yes, Preinstalled
• fuel delivery type: Fog-type Spray
• oe spec or performance/custom: Oe Spec
• fuel type: Gasoline
• performance part: Yes
• connector type: Male

seller carfuelinjector:

• rating: 99.2%
• # reviews: 248
• city: Ontario, California

offer carfuelinjector:

• options: Ship-to-home
• best offers: True
• quantity: 5
• started: April 1, 2025
• availability: In Stock
• sold: 0

returns carfuelinjector:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

shipping carfuelinjector:

• transit: 3-8 Days
• service: Standard
• cost: $0.00
• type: Fixed
• class: Standard

general carfuelinjector:

• condition: New
• Air Fuel Delivery > Fuel Injection Parts > Fuel Injectors

payments carfuelinjector:

• credit card: Diners-club
• wallet: Apple-pay
• other

Maxleve-autopart E15265601X Is Similar To:

• Maxleve-autopart Ma15128401x Fuel Injectors For 2012 2011 2010 2009 2008 Land Rover Lr2 3.2l Lr001982 (40% similar) Don't pull it just yet; start the engine and disconnect fuse. So, make sure you know what you re getting into before get to work. Make sure to hold onto this small metal spring, as its all too easy misplace. Skipping this step could result in a messy and dangerous project, so refer to your vehicles ...(January 2nd, 2025)
• Maxleve-autopart Ma10532601x Fuel Injectors For Volkswagen Eos 2.0l 2009-2016 Gti 2008-2014 (43.3% similar) Black or grey smoke. The check engine light is on. Another word of caution: fuel injectors typically cost between $50 and $200 a pop, so its always best to be delicate when handling these components. This presents a raft of safety issues, so unless you re fairly confident in your local ambulance ...(January 6th, 2025)
• Maxleve-autopart Ma15295101x Fuel Injector For Ford F-750 F-650 Chevrolet Kodiak Gmc Topkick 2009-2004 7.2l (38.8% similar) You might smell a strong fuel odour in and around your car if there is leak or the injectors are releasing too much. Read more about it here. Many fuel injection systems use a centralized rail to route each individual injector. Increased fuel consumption. It is a replacement part, not original part...(January 14th, 2025)
• Maxleve-autopart Ma15265301x For 2006 2005 2004 Mazda Rx-8 1.3l 4pcs Fuel Injectors (61.6% similar) Raise the hood of car an inspect fuel injector rail while is running at idle. Install new o-rings. With everything disconnected from the rail, pull it away fuel injectors. Shut the car off immediately if a leak is present. A strong odor of gasoline is a good indicator that there fuel leak. ...(January 22nd, 2025)
• Maxleve-autopart Ma15266701u Fuel Injectors For 2017 2016 Nissan Rogue 2015 Altima 2.5l (44.3% similar) Don't pull it just yet; start the engine and disconnect fuse. Often caused by dirty or clogged fuel injectors. Increased fuel consumption. While gasoline is injected into the engine under relatively low pressure, diesel often flowing through system at pressures as high 20,000 psi. Rough idling ...(February 1st, 2025)
• Maxleve-autopart B843880eu01 Fuel Injectors For Jaguar Xk 5.0l 2010-2015 Xfr-s 2013-2015 (38.4% similar) You can diagnose many different car problems by the colour of exhaust gases. Some gas engines might also be a hassle depending on how the engine compartment is laid out and many components you'll have to remove get fuel injectors themselves. The first step in replacing a fuel injector is to relieve ...(February 1st, 2025)
• Maxleve-autopart B15004801eu Fuel Injectors For 2018 2017 2016 2015 2014 2013 2012-2007 Toyota Yaris 1.5l (40.2% similar) With the tops of fuel injectors exposed, its now time to remove wiring harness connected each injector. The vehicle might shake and stall when idling if it is not getting enough fuel in the combustion chambers. Another word of caution: fuel injectors typically cost between $50 and $200 a pop, so its...(February 12th, 2025)
• Maxleve-autopart Ma15404201x For Honda Civic 2013-2015 Accord 2008-12 Cr-v 2010-2011 2.4l 4pcs Fuel Injectors (64.6% similar) Some vehicles will have an individual fuel line feeding into each injector, which you can remove one by. Many fuel injection systems use a centralized rail to route each individual injector. Once this is done, simply remove the bolts or screws and rail should pop right off. You might smell a strong ...(February 12th, 2025)
• Maxleve-autopart B15073901eu Fuel Injectors For 2011-2007 Acura Cxs 2005-2006 Rsx 2011-2006 Honda Civic 2.0l (36.5% similar) Rough idling stalling. The engine misfires. Read more about it here. Now you re ready to get pulling. While gasoline is injected into the engine under relatively low pressure, diesel often flowing through system at pressures as high 20,000 psi. Simply lubricate the seals on new injector, replace it ...(March 3rd, 2025)
• Maxleve-autopart B15072601eu Fuel Injectors For 2017-2011 Ford Mustang 3.7l 2017 2016 2015 F-150 3.5l (40% similar) Simply lubricate the seals on new injector, replace it in same hole you took out of, and reconnect wiring harness. Black smoke is an indication that the air-fuel mixture too rich. Read more about it here. Once you start up the vehicle, fuel system should depressurize itself. You might smell a strong...(March 3rd, 2025)
• Maxleve-autopart B15071401eu Fuel Injectors For Jeep Cherokee 1999-2001 Tj 1999-2004 L6 4.0l Gas (42.2% similar) These harnesses are usually held on by little more than a single spring, which you can pry out with Flathead screwdriver or similar implement. The vehicle might shake and stall when idling if it is not getting enough fuel in the combustion chambers. Some gas engines might also be a hassle depending ...(March 3rd, 2025)