FORD AL3Z-9F593-A Fuel Injector

( Manufacturer Part Number: AL3Z-9F593-A ), ( Model: F-250 F-350 ), ( Part Type: Fuel Injector ), ( Genuine Oem: Yes ), ( Manufacturer Warranty: 1 Year ), ( Fitment Type: Direct Replacement ), ( Parts Included: Only Part Reference 0 On The Diagram Is Included )

Review FORD Genuine Fuel Injector fits F-250 2011

The **Ford AL3Z-9F593-A Fuel Injector** is a high-performance, precision-engineered component designed to deliver optimal fuel delivery within modern Ford engines, ensuring efficient combustion, enhanced power output, and improved fuel economy. Part of Ford s advanced fuel injection system, this injector is meticulously crafted to meet stringent automotive standards, combining durability with cutting-edge technology to maintain peak performance under demanding driving conditions. Constructed from high-grade materials, including corrosion-resistant alloys and precision-machined components, the AL3Z-9F593-A is built to withstand the rigors of daily use while minimizing wear and tear over extended periods. Its sleek, compact design integrates seamlessly with Ford s fuel rail assembly, allowing for precise fuel atomization and consistent spray patterns that maximize engine efficiency and minimize emissions.

This fuel injector operates using an electromagnetic solenoid mechanism, which rapidly opens and closes the injector needle to regulate the precise amount of fuel injected into the combustion chamber with each engine cycle. The advanced valve-train design ensures minimal lag between command signals from the engine control unit (ECU) and actual fuel delivery, reducing hesitation and improving throttle response. The AL3Z-9F593-A is engineered to handle high-pressure fuel systems, often found in turbocharged or direct-injection engines, where optimal fuel distribution is critical for performance and reliability. Whether installed in a high-mileage vehicle requiring a replacement or in a performance-oriented engine undergoing a tune-up, this injector delivers consistent and reliable operation, helping to sustain engine health and longevity.

For technicians and enthusiasts alike, the AL3Z-9F593-A represents a critical component in maintaining the integrity of Ford s fuel injection systems. Its compatibility with a range of Ford vehicles, including models equipped with EcoBoost, Ti-VCT, or naturally aspirated engines, makes it a versatile choice for both OEM replacement and aftermarket upgrades. When paired with high-quality fuel and regular maintenance, this injector helps prevent common issues such as clogging, uneven fuel distribution, or injector failure, which can lead to reduced power, poor fuel efficiency, or even engine misfires. With its robust construction and adherence to Ford s engineering specifications, the AL3Z-9F593-A fuel injector stands as a dependable solution for drivers seeking to preserve their engine s performance and efficiency.

**Pros and Cons of buying a Ford AL3Z-9F593-A Fuel Injector**

**Overview**

The Ford AL3Z-9F593-A is a direct-injection fuel injector designed for certain Ford engines, primarily those in the EcoBoost lineup. It is a critical component for fuel delivery, affecting performance, fuel efficiency, and emissions. Below are the key advantages and disadvantages of purchasing this part, along with a conclusion and recommendation.

---

**Pros**

1. **Compatibility and Fitment**

The AL3Z-9F593-A is a direct replacement for Ford s original equipment (OEM) injectors in specific engines, such as those found in the 2.0L and 3.5L EcoBoost models (e.g., Ford Focus ST, Fiesta ST, Mustang EcoBoost, and F-150 with EcoBoost). Purchasing an OEM or high-quality aftermarket part ensures a precise fit, reducing the risk of leaks or improper installation.

2. **Performance and Efficiency**

Fuel injectors like this one are engineered to deliver precise fuel quantities under varying engine conditions. A properly functioning injector ensures optimal combustion, improving throttle response, power output, and fuel economy. Upgraded injectors (if aftermarket) may offer better flow rates, supporting higher performance modifications.

3. **Durability and Longevity**

Ford s OEM injectors are built to last the lifespan of the vehicle under normal driving conditions. High-quality aftermarket alternatives (e.g., from brands like Delphi, Denso, or Stanadyne) often match or exceed OEM durability, especially if they use advanced materials like ceramic coatings or high-flow solenoids.

4. **Warranty and Support**

Reputable manufacturers offer warranties (typically 1 5 years) on their injectors, providing peace of mind against defects. OEM injectors may come with a limited warranty through Ford or authorized dealers. Aftermarket brands often provide customer support for installation or troubleshooting.

5. **Cost-Effective for Replacement**

While individual injectors can be expensive (often $100 $300 each depending on brand and quantity), purchasing them as a set can reduce costs. Replacing a single faulty injector is often cheaper than replacing the entire set, especially if only one is failing.

6. **Compatibility with Modifications**

For enthusiasts, upgrading to higher-flow injectors (e.g., 1000 cc/min) can support forced induction setups (turbocharging/supercharging) or engine tuning. This allows for more aggressive modifications without fueling issues.

7. **Emission Compliance**

Modern fuel injectors are calibrated to meet emissions standards. Using a compatible injector ensures the vehicle passes emissions tests, avoiding potential fines or registration issues.

---

**Cons**

1. **High Replacement Cost**

The cost of individual injectors can be prohibitive, especially when purchasing multiple units (e.g., a set of four for a 4-cylinder engine). Prices vary widely: OEM injectors may cost $200 $400 each, while aftermarket options range from $100 $300. Labor costs for replacement (if not DIY) can add significant expense.

2. **Complex Installation**

Replacing fuel injectors requires removing the intake manifold, fuel rail, and often the throttle body. This process is labor-intensive and may necessitate specialized tools (e.g., injector removal tools, torque wrenches). DIY installation is challenging for inexperienced mechanics, and mistakes can lead to damage or improper sealing.

3. **Risk of Contamination**

Fuel injectors are sensitive to contaminants in the fuel system. If the fuel filter is clogged or the fuel system is dirty, new injectors may become fouled quickly. This can lead to premature failure or reduced performance. Regular fuel system cleaning or using high-quality fuel additives is recommended.

4. **Potential for Counterfeit Parts**

The aftermarket for fuel injectors is prone to counterfeit or low-quality copies, particularly from unbranded sellers. These may fail prematurely, leak, or not function as intended. Purchasing from authorized dealers or reputable online retailers (e.g., RockAuto, Amazon, or specialty auto parts stores) mitigates this risk but requires due diligence.

5. **Compatibility Issues with Non-OEM Parts**

Not all aftermarket injectors are drop-in replacements. Some may require additional modifications, such as new fuel rails, O-rings, or wiring harnesses. Mismatched injectors (e.g., incorrect flow rate or voltage) can cause drivability issues, check engine lights, or even damage the engine management system.

6. **Warranty Void Risks**

Modifying or improperly installing injectors (e.g., overtightening, using incorrect tools) can void warranties. Additionally, some aftermarket injectors may not be covered under Ford s extended warranties, leaving the buyer responsible for repairs if issues arise.

7. **Diagnostic Challenges**

Faulty injectors can cause intermittent issues that are difficult to diagnose. Symptoms like rough idling, misfires, or poor acceleration may not always point directly to injectors, requiring advanced diagnostics (e.g., scan tools, injector flow testing) to confirm the problem.

8. **Environmental and Disposal Concerns**

Fuel injectors contain components that may be hazardous if not disposed of properly (e.g., solenoids, electrical contacts). Improper disposal can lead to environmental contamination. Buyers should ensure they recycle or dispose of old injectors through authorized channels.

---

**Conclusion**

The Ford AL3Z-9F593-A fuel injector is a critical component that, when functioning correctly, ensures reliable performance, efficiency, and emissions compliance. The decision to purchase it whether OEM or aftermarket depends on several factors, including budget, technical expertise, and the vehicle s intended use.

For most consumers, the **primary advantage** lies in its compatibility and performance benefits, especially when paired with a reputable brand and proper installation. However, the **high cost, complexity of installation, and risk of counterfeit parts** are significant drawbacks that must be carefully considered.

If the injector is needed for a **replacement due to failure**, purchasing an OEM or high-quality aftermarket part (e.g., Delphi, Denso, or Stanadyne) is justified for reliability. For **performance upgrades**, investing in higher-flow injectors can be worthwhile if the vehicle is tuned accordingly.

---

**Recommendation**

1. **Verify Compatibility**: Confirm that the AL3Z-9F593-A is the correct part for your specific engine and model year. Cross-reference with your vehicle s service manual or a trusted mechanic.

2. **Choose a Reputable Brand**: Opt for OEM or well-known aftermarket brands (e.g., Delphi, Denso, Stanadyne, or Siemens) to avoid counterfeit parts. Avoid no-name brands unless thoroughly researched.

3. **Budget for Labor or DIY**: If not comfortable with the installation, factor in labor costs (typically $150 $300 per injector for professional installation). Alternatively, invest in the right tools and follow a detailed guide for a DIY approach.

4. **Inspect the Fuel System**: Before installing new injectors, ensure the fuel filter, fuel lines, and fuel rail are clean. Consider using a fuel system cleaner or replacing the fuel filter as a preventive measure.

5. **Consider a Set Replacement**: If multiple injectors are failing or you re upgrading, purchasing a set (even if one is the issue) can save money in the long run.

6. **Use a Scan Tool for Diagnostics**: If symptoms persist after replacement, use an OBD-II scanner to check for misfires or injector-related codes. This helps confirm whether the new injectors are functioning correctly.

7. **Maintain the Injectors**: Regularly use fuel additives (e.g., Seafoam, Techron) and follow the manufacturer s maintenance schedule to prolong injector life.

**Final Verdict**: The Ford AL3Z-9F593-A is a worthwhile investment for reliability and performance, provided it is sourced from a trusted supplier and installed correctly. For most drivers, the benefits outweigh the costs, especially when compared to the potential damage caused by failing injectors. However, weigh the pros and cons carefully, and prioritize quality over price to avoid costly mistakes.

Details:

Electrical parts are not returnable. Parts must be resalable and in the original packaging. In stock orders ship within 24 hours. Genuine Ford Fuel Injector AL3Z-9F593-A:: To 11/01/2010.

F250, f350 super duty. Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost the customer.

part #: al3z9f593 prices

• $56.89-$209.99

specifications carfuelinjector:

• for models: F-250
• for makes: Ford
• for years: 2011
• mpn: Al3z-9f593-a
• model: F-250 F-350
• part type: Fuel Injector
• genuine oem: Yes
• manufacturer warranty: 1 Year
• fitment type: Direct Replacement
• parts included: Only Part Reference 0 On The Diagram Is Included

returns carfuelinjector:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

offer carfuelinjector:

• availability: In Stock
• started: April 26, 2026
• sold: 0
• quantity: 1
• options: Ship-to-home

payments carfuelinjector:

• wallet: Apple-pay
• credit card: Diners-club
• other

general carfuelinjector:

• condition: New
• Air Fuel Delivery > Fuel Injection Parts > Fuel Injectors

seller carfuelinjector:

• city: Hillsdale, Michigan
• # reviews: 3331
• rating: 99.8%

shipping carfuelinjector:

• cost: $8.98
• type: Fixed
• transit: 5-9 Days
• class: Standard
• service: Standard

Ford AL3Z-9F593 Is Similar To:

• Ford Racing Fuel Injector Set of 8 Mustang M-9593-MU32 0-280-158-060 NO RESERVE (37.3% similar) Despite the high flow rate, they are linear and controllable at low pulse width s and have been used in elev applications. Tuning calibration flow sheets available these are the same injectors ford racing Whipple ships with there 05-10 mustang supercharger kits. In addition, these units are high-...(March 4th, 2014)
• 1 YEAR WARRANTY GENUINE OEM BOSCH FUEL INJECTORS 6 02-04 FORD 4.0 V6 (14.5% similar) This listing is for an oem quality rebuilt fuel injector set as pictured, specifically for the vehicles listed in the fitment chart above. On MAR-10-14 at 00:40:18 PDT,: every buyer gets a invitation for cash back. These are ready to install. This injector comes with o-rings, seals, filters, ...(March 12th, 2014)
• 21LB Genuine Bosch 0280155844 FORD AU Injectors TRUE Flow Matched Set 0.86 (33.3% similar) 86% variation with. 01GRAMS I can also do cashback on return. Fully tested & serviced factory genuine bosch 0280155844 21LB ford Au injectors WR2A-AA 20LB 5BAR true flow matched set at. I can also do custom tests setup to suit your standard running voltage and fuel pressure. 01GRAM accuracy free ...(April 14th, 2014)
• Genuine Bosch 0280155861 Ford XS2E-A5B Injectors 0.84 Var Ultrasonicly Cleaned (30.5% similar) This improves fuel accuracy which aides for a smoother running engine, better idle and full throttle fuel delivery and better fuel economy. Please see the test procedure and full results of this set below, the injectors are individually numbered as per flow test sheet. This is a set of fully tested...(March 2nd, 2014)
• Motor Man Bosch Fuel Injector 0280156041 set of 8 Ford Expedition 4.6L (33.6% similar) Remanufactured by: motor man fuel injection 6246...(February 27th, 2014)
• 3R23-AA 0280156123 Fuel Injector Nozzle Injection For Ford XR6 (35.6% similar) Wholesale and retail all kinds of automotive electrical parts and exterior parts, mainly engaged in various model's of car switch, electronic fuel injection system, and the major foreign companies oem parts. The products include: fuel injector,radiator fan motor,airbag control module,knock sensors,...(April 12th, 2014)
• Motor Man 0280158064 Bosch Fuel Injector Set 8 Ford 4.6L 6.8L (36.5% similar) ...(February 27th, 2014)
• 07-12 Mustang Shelby GT500 47lb 47 EV1 Bosch fuel Injectors 5.4DOHC Ford Racing (28.6% similar) Shipping price includes shipping and handling charges contact info: call or 708-612-8934. Set of 8 new oem ford racing / bosch 2007 -12 GT500 high impedance EV14 47LB injectors...(April 9th, 2014)
• ACCEL Fuel Injectors 48 lbs hr 12.0 Ohms Impedance 12 Volt Ford 4.6 5.0LOf8 (25.9% similar) Injector impedance 12. O-rings included yes outside diameter in. Driver type 12 v saturated circuit fuel rail o-ring outside diameter in. Seat to seat height in 880 in. Ohms injector plug bosch/amp-style manifold o-ring outside diameter in. Injector advertised flow rate cc/min 502. Overall height...(May 9th, 2014)
• DeatschWerks Fuel Injectors 39 lb hr Chevy Ford Pontiac Set of 8 18U0100398 (28.1% similar) Fitment information may not be available for all products and those without fitment will not have a compatibility link. Injector advertised flow rate lbs/hr 39 lbs...(January 29th, 2014)
• BRAND NEW Fuel Injectors Ford V8 Trucks 4.6 5.0 5.4 5.8L 1985-2004 SET of 8 (27.1% similar) Made in the USA by standard motor products. They are not remanufactured, not 'take offs and not cheap Chinese knock-offs. Ford used the same spec injectors for many, many years in their small block v8 applications but of several different designs supplied by different oe manufacturers. Depending on ...(March 29th, 2014)