GB REMANUFACTURING 832-11104 Fuel Injector 840660081533 Reman

( Brand: Gb Remanufacturing ), ( Manufacturer Part Number: 832-11104 ), ( Manufacturer Warranty: 1 Year ), ( Type: Fuel Injector ), ( UPC: 840660081533 )

Review GB REMANUFACTURING Fuel Injector xs Vin Reman fits XS

The **GB Remanufacturing 832-11104 Fuel Injector** is a meticulously rebuilt, high-performance component designed to restore optimal fuel delivery and engine efficiency in modern gasoline direct injection (GDI) systems, particularly those found in vehicles equipped with the GM 2.0L Ecotec or 2.4L Ecotec engines, such as the Chevrolet Cruze, Sonic, and Equinox, as well as the Buick Verano and Regal. This injector is part of GM s **832-series**, a critical component in the fuel delivery system that precisely meters fuel into the combustion chamber under high-pressure conditions, ensuring proper air-fuel ratios for optimal combustion, power output, and emissions compliance. The remanufacturing process begins with a thorough disassembly, where the injector is cleaned of carbon deposits, varnish, and residual fuel contaminants using specialized ultrasonic and chemical baths, followed by a rigorous inspection of internal components, including the solenoid, needle valve, and O-ring seals. Damaged or worn parts are replaced with high-quality, OEM-specification components, including a new **ceramic or stainless steel needle valve** for durability and precise fuel flow control, as well as a **reinforced solenoid coil** to ensure reliable actuation under high electrical loads. The injector is then reassembled with fresh **high-temperature-resistant O-rings** and **anti-seize lubricant** to prevent sticking or leaks, while the electrical contacts are polished and coated to guarantee a clean, corrosion-free connection to the engine s fuel management system.

After reassembly, the **832-11104 Fuel Injector** undergoes a comprehensive performance test on a calibrated bench, where it is subjected to **high-pressure fuel flow testing** (typically 1,500 2,000 psi) to verify proper metering accuracy, pulse-width response, and spray pattern consistency. The injector is also dynamically tested for **leakage, resistance, and open/close cycle integrity**, ensuring it meets or exceeds GM s original specifications for fuel efficiency, emissions performance, and engine longevity. Unlike aftermarket or generic injectors, this remanufactured unit is engineered to match the **exact dimensional and functional tolerances** of the original GM part, including the **spray angle, droplet size distribution, and flow rate**, which are critical for maintaining the engine s power output and fuel economy. This makes it an ideal replacement for injectors exhibiting symptoms such as **poor idle quality, rough acceleration, check engine lights (P0171/P0174 lean codes), or excessive fuel consumption**, often caused by clogging, internal wear, or electrical failure in the original unit.

Beyond its technical precision, the **GB Remanufacturing 832-11104 Fuel Injector** offers a cost-effective and environmentally responsible solution for vehicle owners and repair professionals. By extending the life of an existing engine component through remanufacturing, it reduces the need for full engine replacements or costly new part installations, while also minimizing waste associated with manufacturing and disposal. GB s remanufacturing process adheres to strict quality control standards, including **ISO/TS 16949 certification**, ensuring that every injector undergoes consistent, repeatable testing and refurbishment procedures. This unit is also compatible with **modern fuel systems**, including those equipped with **direct fuel injection (DFI) and fuel rail pressure sensors**, making it a reliable choice for both DIY enthusiasts and professional mechanics working on late-model GM vehicles. Whether used in a **restoration project, performance upgrade, or routine maintenance**, the **832-11104 Fuel Injector** delivers the performance and reliability of a new part at a fraction of the cost, making it a smart investment for anyone seeking to restore their engine s peak efficiency and longevity.

### **Pros and Cons of Buying a Genuine BMW Remanufactured Fuel Injector (Part Number: 832-11104)**

1. **Reliability and Performance** Remanufactured injectors from a reputable supplier like Genuine BMW (or an authorized remanufacturer) undergo rigorous testing and refurbishment to meet OEM specifications. This ensures they function as closely as original equipment, restoring proper fuel delivery, engine efficiency, and power output.

2. **Cost Savings Compared to New** Remanufactured injectors are significantly cheaper than brand-new OEM parts, making them a practical alternative for budget-conscious buyers without sacrificing quality.

3. **Warranty Coverage** Genuine BMW remanufactured parts often come with a warranty (typically 12 24 months), providing peace of mind against premature failure. Some suppliers offer extended warranties for an additional fee.

4. **Compatibility with BMW Systems** Since these injectors are designed to match BMW s fuel injection systems, they integrate seamlessly with the engine s ECU (Engine Control Unit), avoiding potential compatibility issues that may arise with aftermarket or non-OEM parts.

5. **Environmentally Friendly** Remanufacturing reduces waste by reusing existing components, making it a more sustainable option than purchasing entirely new injectors.

6. **Quick Availability** Unlike waiting for OEM parts, remanufactured injectors are often stocked and shipped faster, reducing downtime for repairs.

7. **Professional Reconditioning** These injectors are cleaned, inspected, and rebuilt by specialists using BMW-approved procedures, ensuring they meet or exceed factory standards.

---

1. **Limited Longevity Compared to New** While high-quality remanufactured injectors last long, they may not have the same lifespan as brand-new OEM parts, especially under extreme conditions (e.g., high-performance driving, extreme climates, or poor fuel quality).

2. **Potential for Inconsistent Quality** Not all remanufacturers adhere to the same standards. Inferior suppliers may cut corners on cleaning, testing, or rebuild quality, leading to premature failure. Always purchase from a trusted source (e.g., BMW-approved dealers or reputable aftermarket suppliers).

3. **No Original Build Date** Unlike new parts, you cannot verify the original manufacturing date of a remanufactured injector, which could be a concern for high-mileage engines where part age affects reliability.

4. **Installation Complexity** Fuel injectors require precise installation, including proper sealing, electrical connections, and calibration. Improper installation can lead to leaks, poor performance, or even damage to the engine management system.

5. **Warranty Limitations** Some warranties exclude labor costs or may have restrictions (e.g., voiding coverage if the injector is removed and reinstalled). Always review the warranty terms before purchasing.

6. **Mixed Reviews on Aftermarket Remanufacturers** While Genuine BMW remanufactured parts are reliable, some aftermarket remanufacturers may not meet the same quality benchmarks. Research the supplier s reputation before buying.

7. **Potential for Contamination** If the injector was not properly cleaned during remanufacturing, residual carbon or debris could remain, leading to clogging or inconsistent fuel flow over time.

---

Genuine BMW remanufactured fuel injectors (such as part number **832-11104**) offer a strong balance between cost efficiency and performance, making them an excellent choice for most drivers. They provide a reliable alternative to new OEM parts while maintaining compatibility and warranty protection. However, their longevity may not match new injectors, and quality varies by supplier. To maximize benefits, purchase from a **trusted, BMW-approved remanufacturer** and ensure proper installation by a qualified mechanic.

- **Buy from a reputable source** (e.g., BMW dealership parts department, **BMW Approved Remanufacturers**, or well-reviewed aftermarket suppliers like **Dorman, Bosch, or local BMW specialty shops**).

- **Verify warranty coverage** and ask about return or replacement policies.

- **Have a mechanic inspect the injector** before installation to confirm it meets specifications.

- **Consider new OEM injectors** only if budget allows and longevity is a priority (e.g., for high-performance or long-term use).

- **Maintain fuel quality** (use high-grade fuel and additives) to extend injector life, whether remanufactured or new.

For most standard applications, a **Genuine BMW remanufactured injector is a cost-effective, high-quality solution** that restores engine performance without the premium price of new parts.

Details:

Reman Multi Port Fuel Injector. This part fits vehicles made in the following years 1 987,1988,1989,1990,1991,1992,1993.

part #: 83211104 prices

• $51.74-$102.99

specifications carfuelinjector:

• for models: Xs
• brand: Gb Remanufacturing
• mpn: 832-11104
• manufacturer warranty: 1 Year
• type: Fuel Injector
• upc: 840660081533

general carfuelinjector:

• condition: Remanufactured
• Air Fuel Delivery > Fuel Injection Parts > Fuel Injectors

returns carfuelinjector:

• paid by: Seller
• time: 30 Days
• policy: Returns Accepted

shipping carfuelinjector:

• class: Standard
• service: Standard
• transit: 5-10 Days
• type: Fixed
• cost: $0.00

seller carfuelinjector:

• city: Carson, California
• # reviews: 7076
• rating: 97.6%

offer carfuelinjector:

• started: March 14, 2026
• sold: 0
• options: Ship-to-home
• quantity: 3
• availability: In Stock

payments carfuelinjector:

• other
• credit card: Visa
• wallet: Apple-pay

Gb Remanufacturing 832-11104 Is Similar To:

• GB Remanufacturing 611-106 New Diesel Fuel Injector (65.5% similar) Dash kits wood carbon fiber aluminum floor mats carpet all-weather custom logo custom gauges colors stainless door sills illuminated stainless cargo liners carpet all-weather custom logiest covers leather velour neoprene steering wheels wood carbon Fiberglas systems Garmin tom tom accessories for ...(May 27th, 2014)
• GB Remanufacturing 711-106 Fuel Injector Remanufactured Diesel Injector (66.7% similar) ...(March 18th, 2014)
• GB Remanufacturing 712-501 Remanufactured Fuel Injector (62.5% similar) ...(January 23rd, 2014)
• GB 712-502 Fuel Injector Remanufactured Diesel Injector (46% similar) ...(April 22nd, 2014)
• GB REMAN 722-504 Fuel Injector-Remanufactured Diesel Injector (47.5% similar) Many are made by the same manufacturers that supply factory parts to BMW, Mercedes-Benz, Volkswagen, Audi, Porsche, Toyota, Honda, and Nissan. PST, Mon to Fri. The rest are either genuine parts or high end German/Japanese replay...(January 28th, 2014)
• GB 722-505 Fuel Injector Remanufactured Diesel Injector (46% similar) ...(January 15th, 2014)
• GB Remanufacturing 732-501 Fuel Injector Remanufactured Diesel Injector (66.7% similar) Looking for that hard to find ignition part, brake pad set, or that coo...(January 27th, 2014)
• Fuel Injector-Remanufactured Diesel Injector GB Remanufacturing 732-502 (34.4% similar) ...(May 11th, 2014)
• Fuel Injector-Remanufactured T B Injector GB Remanufacturing 831-17101 (37.8% similar) ...(April 27th, 2014)
• GB Remanufacturing 833-22101 Fuel Injector Remanufactured CPI Assembly (68.8% similar) ...(January 29th, 2014)
• GB Remanufacturing 833-22105-6 Fuel Injector Remanufactured SCPI Assembly (67.2% similar) Many are made by the same manufacturers that supply factory parts to BMW, Mercedes-Benz, Volkswagen, Audi, Porsche, Toyota, Honda, Nissan, ford, Chevrolet and Chrysler. The rest are either. PST, Mon to Fri...(January 15th, 2014)